1. allupgrade_msd338_4G_ref35.bin renamed to allupgrade_msd338_4G_sos.bin 2. Inserted the USB flash drive in USB1 (it is already working) (By the way, for all operations with the USB flash drive it is necessary to wait for the indicator of the watch on the gas) 3. Power is supplied to the TV 4. TV has lifted the flash drive and on a blue background issued Upgarding software progress ran up to 45% quickly after 45 to 100 slower, but reached the end of 5. TV Issued the message Software Upgrade complete and blinked rapidly the red / blue red LED 6. Pulled the USB flash drive 7. Turned off the TV from the network. 8. Turned on the TV - the red light of the watch was on. 9. I pressed the button on. on the side panel 10. There was an inscription Elenberg, but not red and a purple (I understand the beat of the matrix does not match) 11. A little patience and ... the long-awaited change of the image WISDOM SHARE inscription and the animation is quite long then the initial setup menu 12 I connected the mouse and the keyboard 13. I pressed the TV menu buttons - got into the settings menu 14. I immediately typed 1147 on the keyboard - I got to the service menu 15. In the service menu chose Panel Setting (8-point) 16. In Panel Setting (10-point) LVDS Color Depth set 6-bit instead of 8-bit (arrow keys) = the image was corrected 17. Left the menu esc 18. passed the initial setup. 19. It seems everything is OK. Now only tests and pick up the remote.
Hi there, I have wrongly applied this bin file to my 32 inch china tv with resolution 1366x768. All gone mess. TV working but all screening got out its actual state. Also I tried many other bin file after downloading correct resolutions but they are not picked by TV as USB drive. Anyone can help?
27 Comments
Plz tell me how to upload it
ReplyDeletehow to upload it?
ReplyDelete4 part no't download ,link is dead
ReplyDeletePart 4 - file not found
ReplyDeletePart 4 - file not found
ReplyDeletePart 4 - file not found
ReplyDeletewww.ledlcdtechnician.com
ReplyDeletecomplete file
hd and non hd file
How to install software
ReplyDelete1. allupgrade_msd338_4G_ref35.bin renamed to
allupgrade_msd338_4G_sos.bin
2. Inserted the USB flash drive in USB1 (it is already working) (By the way, for all operations with the USB flash drive it is necessary to wait for the indicator of the watch on the gas)
3. Power is supplied to the TV
4. TV has lifted the flash drive and on a blue background issued Upgarding software progress ran up to 45% quickly after 45 to 100 slower, but reached the end of
5. TV Issued the message Software Upgrade complete and blinked rapidly the red / blue red LED
6. Pulled the USB flash drive
7. Turned off the TV from the network.
8. Turned on the TV - the red light of the watch was
on. 9. I pressed the button on. on the side panel
10. There was an inscription Elenberg, but not red and a purple (I understand the beat of the matrix does not match)
11. A little patience and ... the long-awaited change of the image WISDOM SHARE inscription and the animation is quite long then the initial setup menu
12 I connected the mouse and the keyboard
13. I pressed the TV menu buttons - got into the settings menu
14. I immediately typed 1147 on the keyboard - I got to the service menu
15. In the service menu chose Panel Setting (8-point)
16. In Panel Setting (10-point) LVDS Color Depth set 6-bit instead of 8-bit (arrow keys) = the image was corrected
17. Left the menu esc
18. passed the initial setup.
19. It seems everything is OK. Now only tests and pick up the remote.
Hi, you have this firmware TP.MS338.PC821
DeleteLinks are dead ... For part 1 and part 4 .. pls update ASap .. pls
ReplyDeleteHi Sai Praveen what you did for software I loaded below given software but China remote not working can you help me
Deletehttps://drive.google.com/file/d/0ByQMSiKaHChOck41M1dqcmtXLUk/view
ReplyDeleteHi software got uploaded thank you very much, but remote not working please suggest urgent tv stuck at language selection (power on by hard button)
DeleteHi there,
DeleteI have wrongly applied this bin file to my 32 inch china tv with resolution 1366x768. All gone mess. TV working but all screening got out its actual state. Also I tried many other bin file after downloading correct resolutions but they are not picked by TV as USB drive. Anyone can help?
ReplyDeletemise a jour TP.MS338.PB801
https://drive.google.com/file/d/0ByQMSiKaHChOck41M1dqcmtXLUk/view
Please let me know which remote will work
DeleteCan you please tell me working remote for this
DeletePlease tell me which remote tv is stuck at language
Deletemy tv remote is not working and the applictaion is not opening.when led turn the logo of other brand show.
DeleteBuenas tardes, necesito las partes que no están presentes... la 8 y 9... porfavor...
ReplyDeletemy board TP.MS338.PB801 issue is stock only in logo. Where to download software. Can someone help me, please
ReplyDeletehttps://www.kazmielecom.com/2018/11/15/tp-ms338-pb801-software-free-download.html
Deletehttps://www.kazmielecom.com/2018/11/15/tp-ms338-pb801-software-free-download.html
ReplyDeleteI found 25 entries, which is the right one for Smart TV RCA RC40G16N-SM
ReplyDeleteIf you want to download more resolutions of TP.MS338.PB801 then Please Click Here to Go
ReplyDeletecomo instalar software a la placa tp.ms338.pb819 ????
ReplyDelete
ReplyDeleteHI sir
I want firmware and software for tp ms338 pb801 1920x1080 model le4219h general max tv smart
Made in chain
Can you help me