Main Board : T.MS608.81
CPU: MSD6A608HTAB
ISP upgrade Mboot
1. Preparations: Mstar serial port upgrade tools, a tool-driven.
2. Install the driver:
Connect the serial port tool on the PC to the device manager to view and update the Mstar USB Debug Tool A and Mstar USB Debug Tool B drivers. The driver search directory is located in the directory where the provided Mstar driver is updated.
3. Start the upgrade
a) Double-click to open ISP_Tool.exe tool, enter ISP Tool main interface.
b) Select the main menu Connect to connect, it can identify the chip type that is connected successfully. If unsuccessful attempt to re-power the board, repeat this step.
c) Select the main menu Read option, the path to the mboot.bin file you want to upgrade.
d) Then select the main menu Auto Options, click Run to upgrade. The upgrade was successful when the green font PASS appears in the lower right corner.
4. Special instructions: Erase Device must be set to All Chip.
AC power upgrade the main program
1) complete burn mBoot burn.
2) MstarUpgrade.bin file on the root directory of the U disk.
3) Re-power the board, hold down the input key on the keypad, until the yellow light flashes, it means to start the upgrade, you can release the input key.
4) Upgrade, through the remote control LED flashing
1: Slow flashing green indicates upgrade.
2: Green light flashing, indicating that the upgrade is successful.
3: Red light flashes, indicating that the upgrade failed.
Factory menu upgrade (Mboot and main program)
1. Unzip the mboot.bin, MstarUpgrade.bin into the root directory of the U disk.
2. After power on, enter the TV interface, insert the USB flash drive, remote control key input source + 1147 (before the software may be source + 2580) into the factory menu (factory menu)
3. Choose other options
4. Select upgrade mboot, enter the confirmation dialog box.
5. Select comfirm upgrade Mboot, after the upgrade is successful, the prompt box is as follows:
6. Choose confirm to return to the factory menu:
7. Select upgrade main, enter the confirmation dialog box:
8. Select comfirm to upgrade the main program (During the black screen, and the time will be longer, please be patient), the upgrade process, the yellow light will blink; TV will automatically restart after the upgrade.
Hot to download firmware
0 Comments